240 mm x 172 mm x 57 mm (9.4 x 6.8 x 2.2). 220 mm x 160 mm (8.7" x 6.3"). 8.0 mm (0.3). Automatic/manual start with configurable start/stop timers. Battery temperature monitor/charge remaining display/depth of discharge display.
USB, RS232, RS485, Ethernet and Modbus RTU/TCP communications. Offers flexibility to control the module manually, remotely or on pre-set timers and start/stop according to battery condition.Gives full mains (utility) back up. Provides flexibility for use on AC or DC systems. Provides information on battery temperature, charge remaining and depth of discharge. Ensures data is not lost when module is disconnected from its power source. Provides access to historical alarms and operational status.
Avoids the battery draining completely by starting the generator when the battery needs charging. Provides secure and simple off site monitoring. All ports are continuously active. Configurable battery maintenance alarms (3). 2 DC shunt inputs (configurable 0-250mV and 0-5000A).Overcurrent & short circuit DC overload alarms. Fuel usage monitor and low level alarms.
Able to survive 0V for 50 mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries. 260 mA at 12V, 130 mA at 24V.120 mA at 12V, 65 mA at 24V. 15V to 150V AC (L-N). 3.5 Hz to 75 Hz. 15V to 333V AC (L-N). +/- 0.5V to 70V.
The item "DSE Deep Sea Electronics DSE7450 DC Generator Controller 7450 Automatic Manual" is in sale since Wednesday, June 8, 2016. This item is in the category "Business & Industrial\Light Equipment & Tools\Generator Parts & Accessories".The seller is "powersystemsplusinc" and is located in Forest Grove, Oregon. This item can be shipped to United States.